Vardhman Polymers – Waterproofing System
High Polymer modified Elastomeric
Product & Technology from Germany
CONTACT US
Vardhman Polymers-Waterproofing System
Vardhman Polymers – WS is High Polymer modified Elastomeric Waterproofing System formulated with the best quality of Polymers from Germany. It’s a TWO Component Waterproofing System.
1) Vardhman Polymers – WS Liquid – Highly Elastomric modified Polymer from Germany
2) Vardhman Polymers – WS Powder – Containing different sizes of Silica Quartz Sands, Cement, Water retention and free flow chemicals
ADVANTAGES
- Makes building component totally waterproof.
- Excellent adhesion.
- Water vapor permeabile (i.e. Breathable)
- Highly Elastomeric & Flexible.
- Very good Pot Life (approx 60 mins)
- Easy to apply with Brush.
- Self curing system.
- Prevents efflorescence.
AREAS OF USE
Terraces, Bathrooms, Swimming pools, Exterior Walls, and Flowerbed.
- Contains Organic & Inorganic binder
- Shrink free & crack free hardening
- Low VOC content
- Environmental friendly
APPLICATION
- On Terraces / Bathrooms
– On Slab- 1st Coat
– After 4 hrs – 2nd Coat. - Then do slopping / brickbat.
– On slopping – 3rd Coat
– After 4 hrs – 4th Coat.
- On Walls
– On Blocks/Bricks Walls – 1st Coat
– After 4 hrs – 2nd Coat.
– Do the plaster on top of 2nd Coat
Additional information
Coverage
70 to 75 sq.fts in One Coat.
MIXING RATIO
Vardhman Polymers – WS Liquid – 1 kg
Vardhman Polymers – WS Powder – 1½ kgs
Water – ½ kgs make it brushable (Mix above material in stirrer for uniform mixing)
PACKING
Vardhman Polymers – WS (Liquid) – 20 kgs cans (Colour – White)
Vardhman Polymers – WS (Powder) – 30 kgs bags (Colour – Grey / White)
Colour
Grey
White
Shelf Life
6 months from packing.
Precaution
Vardhman Polymers – WS – is composed of non toxic material. However care should be taken to avoid inhalation while mixing or handling. Store in dry place.
Note
1. Damaged surface should be repaired, cleaned & remove all loose material / particles.
2. Pre-wet surface (only damp) before application of 1st Coat.
3. Keep solution for 5-10 mins after mixing.
4. 2nd Coat should be applied after 4 hrs of 1st coat (after touch dry of 1st coat)
5. During application, keep stirring after mixing, to avoid separation of sand.
6. Screeding is must on waterproof coat to protect from manual damages.
7. Pond Testing can be done after 5 days from 4th Coat.