Vardhman Polymers – Ready Smooth Plaster
High Polymer modified Elastomeric Product and Technology from Germany
CONTACT US
Vardhman Polymers – Ready Smooth Plaster
Vardhman Polymers – PL is High Polymers Modified Self Curing Smooth ready plaster, formulated with High Quality Polymers from Germany. It is Cementious, Single Component dry powder, having properties of Excellent bonding, even with thin layer.
ADVANTAGES
- Excellent bonding with dense and smooth concrete surface and ALC block surface.
- Long term Adhesion & Stability with Breathable Property.
- Self Curing & Fast Setting with Special Water Retention Additives.
- Special Skim Coat Plastering (3mm) with good workability.
- No Hacking required on Concrete in application of Vardhman Polymers-PL.
- It is advice for internal and external plastering.
- Fast & Easy to apply with the trowel, which saves time & saves labour cost.
AREAS OF USE
Vardhman Polymers PL can be applied on Blocks surface, smooth and dense concrete surface walls, ceiling area etc.
- Contains Organic & Inorganic binder
- Shrink free & crack free hardening
- One component (1K) system
- Low VOC content
- Environmental friendly
- Good pot life (appr.1 hr.) after water mixing.
APPLICATION
- Mix 300 to 400 gms of water in 1 kg of Vardhman Polymers-PL under stirring. (mix well) for better workability.
- Keep solution for 5-10 mins. after mixing with water
- Prewet the surface before application.
- Apply with trowel.
Additional information
Packing
20 kgs Bag
Colour
Grey
Shelf Life
6 months from packing date
Precaution
Vardhman Polymers – PL powder is composed of non toxic material. However care should be taken to avoid dust inhalation while mixing or handling. Store in dry place.