Vardhman Polymers – Tile Adhesive
High Polymer modified Elastomeric Tile Adhesive
Product & Technology from Germany
CONTACT US
Vardhman Polymers – Tile Adhesive
Vardhman Polymers – TA is a High Polymer modified Tile Adhesives, made with best quality of German Polymers. This results in enabling user to fix the tiles / marbles / granite with thin bed technique using Vardhman Polymers-TA against traditional thick bed technique of cement/sand.
Vardhman Polymers – Tile Adhesive is highly suitable for fixing the Vitrified Tiles, Heavy Marbles / Granites etc even on dense & smooth Concrete surfaces. One can apply Tile-on-tile, using Vardhman Polymers – TA. This results in high cost savings, since no need to break/remove old tiles & laying new one.
ADVANTAGES
- High Tensile adhesion strength
- Highly flexible in expansion/contraction, due to its thixotropic flexibility.
- Excellent Pot Life (apporx 1hr)
- Excellent Open Time after laying on the surface.
- Very low structural load due to reduced material consumption.
- Reduces Labour cost & logistic cost, results in high productivity.
- No need to soak tiles before application.
- Single Component System.
- No curing is required after laying of tiles.
- Flooring can be used after 24 hours.
AREAS OF USE
Vardhman Polymers-TA (Silver)
- House Floor Tiles
Vardhman Polymers-TA3 (Gold)
- Bathroom Floor Tiles
- Bathroom Wall Tiles
- Roof Tiles
Vardhman Polymers-TA6 (Diamond)
- Marbles / granite framing at doors & windows
- Bathroom Floor Tiles
- Terrace Tiles
- Swimming Pools Tiles
- Tiles-on-Tiles
APPLICATION
- Take clean water (25 to 30 parts). Then add Vardhman Polymers-TA/TA3/TA6 (100 parts) in water. Mix to prepare a homogenous thick paste. (for fast and uniform mixing use stirrer)
- Keep mixed material idle for 5 mins. Remix after 5 mins. & use immediately.
- Apply mixed material with the notched trowel on the wall / flooring.
- Start applying tiles / marbles / granites within 10-15 minutes of applying Vardhman Polymers-TA/TA3/TA6 on surface.
- Allow tiling to set for 24 hours. Joint filling can be done after 24 hours.
Note
* Surface must be clean and free from any loose material.
* Damaged surface should be repaired before tiling.
* Always add powder to water.
* Mixed material should be used within 45 to 60 mins.
* Vardhman Polymers-TA is ready-to-use Tiles Adheisve. Hence Do not add sand or cement at site.
* Not recommended for use on gypsum plaster & acrylic painted surface.
Additional information
Coverage
25 to 30 sq .fts per bag of 20 kgs, depending upon line-level.
Techcnical Data
Colour – Grey
Polymer used – VAE co-polymer
Mixing Ratio – 1 part of Vardhman Polymers-TA + 250 to 300 ml water
Coverage – 25 to 30 sq.fts per bag of 20 kgs, depending upon the line-level
Pot Life – approx 60 mins at 30℃
Open Time – 10 to 15 mins.
Packing
20 Kgs bags.
Shelf Life
12 months, when kept in sealed and stored in dry & dampfree area.
Precaution
Vardhman Polymers – Tile Adhesive is composed of non toxic material. However care should be taken to avoid dust inhalation while mixing or handling. Store in dry place.